Medical Technologies

Set of Implants and Instruments for Osteosynthesis Universal No. 2 according to TU 9437-007-12679379-2014

Set of Implants and Instruments for Osteosynthesis Universal No. 2 according to TU 9437-007-12679379-2014

Set of Implants and Instruments for Osteosynthesis Universal No. 2
According to TU 9437-007-12679379-2014

Implants:

  • Cortical screw with conical thread (diameter 2.7mm; length 10...70mm) – 10 pieces
  • Cortical screw (diameter 2.7mm; length 10...50mm) – 10 pieces
  • Cortical screw (diameter 2.0mm; length 8...40mm) – 10 pieces
  • Cortical screw with conical thread (diameter 7.0mm; length 60...120mm) – 4 pieces
  • Cancellous screw with conical thread (diameter 3.5mm; length 10...80mm) – 10 pieces
  • Cancellous screw with conical thread (diameter 5.0mm; length 15...100mm) – 10 pieces
  • Cancellous screw (diameter 6.5mm, full-threaded; length 20...120mm) – 10 pieces
  • Compression screw for 3-legged nail – 1 piece
  • Malleolar screw (diameter 4.5mm, length 20...110mm) – 4 pieces
  • Canulated screw with conical thread (diameter 7.0mm, length 60...120mm) – 10 pieces
  • Spongiotic screw with conical thread (diameter 7.0mm, length 60...120mm) – 4 pieces
  • Locking screw (diameter 3.5mm, 4.0mm, 5.0mm; length 26...100mm) – 4 pieces
  • Reconstructive plate (mini) (length 24...89mm) – 2 pieces
  • Mini plate (straight) (length 36...116mm) – 2 pieces
  • Small T-shaped oblique plate (length 52...107mm) – 2 pieces
  • Y-shaped plate (left, right) (length 59...139mm) – 2 pieces
  • T-shaped plate for shoulder neck with U/S (length 104...195mm) – 2 pieces
  • Angled plate 130° with U/S (length of diaphyseal part 80...210mm) – 2 pieces
  • Femoral plate with U/S (length 165...372mm) – 2 pieces
  • Diaphyseal plate for clavicle with U/S (left, right) (length 67...125mm) – 2 pieces
  • Clavicle plate with U/S (left, right) (length 45...95mm) – 4 pieces
  • Plate for olecranon with U/S (left, right) (length 80...161mm) – 2 pieces
  • Pelvic clamp – 1 piece

Instruments:

  • Drill guide (diameter 1.4mm) – 1 piece
  • Drill guide (diameter 2.0...6.5mm, length 80...120mm) – 4 pieces
  • Heel guide – 1 piece
  • Pin introduction guide – 1 piece
  • DMV guide – 1 piece
  • Channel length measurer – 1 piece

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, Set of Implants and Instruments for Osteosynthesis Universal No. 2 according to TU 9437-007-12679379-2014, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.

Copyright MAXXmarketing GmbH
JoomShopping Download & Support