TERAD 200 Radiotherapy Device

Components:

Stand, manufactured by UP "ADANI", Belarus – 1 unit
Control Console, manufactured by UP "ADANI", Belarus – 1 unit
High-Voltage Generator, manufactured by "Spellman", USA, or "VJ Technologies Inc.", USA, or "Comet", Switzerland – 1 unit
X-ray Tube, manufactured by "Comet", Switzerland, or "Varian Medical Systems", USA – 1 unit
Cooling System, manufactured by "Comet", Switzerland – 1 unit
Timer, manufactured by UP "ADANI", Belarus – 1 unit
Controller, manufactured by UP "ADANI", Belarus – 1 unit
Video Camera, manufactured by "Planet Technology Corp.", Taiwan – 1 unit
Intercom Device, manufactured by "Unibelus", Belarus – 1 unit
Control Panel, manufactured by UP "ADANI", Belarus – 1 unit
Operator Workstation, manufactured by UP "ADANI", Belarus – 1 unit, including:
- PC: RAM at least 4 GB, hard drive at least 400 GB
- LCD Monitor, at least 22" – 2 units
- Uninterruptible Power Supply (UPS) of at least 650 VA
- MedXTera Radiotherapy Device Management Software, UP "ADANI", Belarus – 1 unit
Dosimeter, manufactured by "PTW", Germany, Registration No. FSZ 2011/09009 – 1 unit
Applicator Cap, manufactured by UP "ADANI", Belarus – 1 unit
Set of Applicators, manufactured by UP "ADANI", Belarus – 1 set
Filter Set, manufactured by UP "ADANI", Belarus – 1 set
Patient Table, manufactured by UP "ADANI", Belarus – 1 unit
Set of Installation Parts, manufactured by UP "ADANI", Belarus – 1 set
High-Voltage Cable, manufactured by UP "ADANI", Belarus – 1 unit
Set of Operational Documentation, manufactured by UP "ADANI", Belarus – 1 set

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, TERAD 200 Radiotherapy Device, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.

Back