Newster Medical Waste Treatment and Thermal Sterilization System (with Shredding and Automatic Packaging) with Accessories

Newster Medical Waste Treatment and Thermal Sterilization System (with Shredding and Automatic Packaging) with Accessories

The Newster system is designed for the disposal and thermal disinfection of medical waste, incorporating shredding and automatic packaging functionality. Available models: Newster 10 and Newster 5.

Included Accessories:

1. Automatic waste packer "Autopack"
2. Working chamber
3. Filter unit
4. Control module for the sterilization process with shredding functionality
5. Printer
6. Metal anchors, size: 60x80 mm – up to 50 pcs
7. Wall mounting gasket for aspirator, size: 6x50 mm, diameter 10 mm
8. Wall mounting gasket for aspirator, size: 6x50 mm, diameter 12 mm
9. Aluminum air exhaust hose, diameter: 120 cm
10. Aluminum air exhaust hose, diameter: 140 cm
11. Red Rilsan hose for opening mechanical parts, size: 6x4 cm
12. Blue Rilsan hose for waste cooling, size: 8x6 cm
13. Zinc bolts, size: 10x20 mm – up to 50 pcs
14. INOX bolts, size: 16x55 mm – up to 50 pcs
15. GROWER INOX nuts – up to 50 pcs
16. PIANA INOX nuts – up to 50 pcs
17. MP13 HEPA filter for dust protection
18. AS filter hook
19. AIRFIBER air supply hose for filter, diameter: 65 mm
20. Flat cover gasket
21. V-shaped cover gasket
22. Activated carbon for odor removal – up to 12 packs
23. Temperature sensor TCJ
24. Protective cover for long TCJ sensor
25. Cast iron knives – up to 50 pcs
26. Knife holders – up to 2 pcs
27. Waste shredding knife – up to 2 pcs
28. Temperature sensor with 30 kW / 24h rating
29. Sensor housing for 30 kW / 24h temperature sensor
30. Protective spacer
31. Vertical knives – up to 2 pcs
32. Temperature sensor
33. Digital ammeter housing, size: 72x72 cm
34. TCJ sensor temperature display
35. AST2 temperature interface
36. Bearing 62310-2RS1
37. Bearing 62310-2RS1 (duplicate)
38. VITON oil seal for sensors
39. 5/2 bistable pneumatic valve, 1/8"
40. 3/2 NC pneumatic valve, 1/8" 24VDC
41. Lower sterilization chamber section
42. Fuses – up to 200 pcs
43. Water sprayer for waste cooling
44. Hypochlorous acid salt sprayer for disinfection
45. Airfiber hose for air supply to filter, diameter: 65 mm
46. INOX screw, size: 16x40 mm
47. 6LT compressor
48. Packing cardboard for the unit
49. EPAL Euro pallet 80x1 for equipment packaging
50. Aspirator CAPPA
51. Cable, size: 16 mm
52. Plastic cable terminal
53. Smoke duct pipe, diameter: 140 mm
54. Socket, diameter: 140 mm
55. INOX water drain hose, diameter: 120 mm
56. PVC water drain hose, diameter: 32 mm
57. NW 109 siphon

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, Newster Medical Waste Treatment and Thermal Sterilization System (with Shredding and Automatic Packaging) with Accessories, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.