Medical Devices for Intravenous Infusion

Medical Devices for Intravenous Infusion

Available models:

• Three-way infusion stopcock
• Lipid-resistant three-way infusion stopcock
• High-pressure three-way infusion stopcock
• Three-way EX infusion stopcock with extension line, lengths:
  • 5 cm (Ø1.5 mm / 2.8 mm)
  • 10 cm (Ø1.5 mm / 2.8 mm)
  • 25 cm (Ø1.5 mm / 2.8 mm)
  • 50 cm (Ø1.5 mm / 2.8 mm)
  • 100 cm (Ø1.5 mm / 2.8 mm)
  • 150 cm (Ø1.5 mm / 2.8 mm)
  • 200 cm (Ø1.5 mm / 2.8 mm)
  • 500 cm (Ø1.5 mm / 2.8 mm)
• Infusion extension line, lengths:
  • 10 cm (Ø1.5 mm / 2.8 mm)
  • 25 cm (Ø1.5 mm / 2.8 mm)
  • 50 cm (Ø1.5 mm / 2.8 mm)
  • 100 cm (Ø1.5 mm / 2.8 mm)
  • 150 cm (Ø1.5 mm / 2.8 mm)
  • 200 cm (Ø1.5 mm / 2.8 mm)
• High-pressure (HP) infusion extension line, lengths:
  • 10 cm (Ø1 mm)
  • 25 cm (Ø1 mm)
  • 50 cm (Ø1 mm)
  • 100 cm (Ø1 mm)
  • 150 cm (Ø1 mm)
  • 200 cm (Ø1 mm)
• Light-protected low-pressure (LP) infusion extension line, lengths:
  • 10 cm (Ø1.5 mm / 2.8 mm)
  • 25 cm (Ø1.5 mm / 2.8 mm)
  • 50 cm (Ø1.5 mm / 2.8 mm)
  • 100 cm (Ø1.5 mm / 2.8 mm)
  • 150 cm (Ø1.5 mm / 2.8 mm)
  • 200 cm (Ø1.5 mm / 2.8 mm)

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, Medical Devices for Intravenous Infusion, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.