Implantable Plates with Screws for Cranioplasty

Implantable plates with screws for cranioplasty are available in the following types:

Straight Plates:

2 holes — 5 mm
2 holes — 9 mm
2 holes — 12 mm
4 holes, center — 9 mm
4 holes, center — 12 mm
5 holes — 18 mm
6 holes — 22.5 mm
8 holes — 31.5 mm
10 holes — 40.5 mm
12 holes — 49.5 mm
20 holes — 85.5 mm

D-Y and X Plates:

D-Y 6 holes — 18 mm
D-Y 6 holes — 21 mm
X — 4 holes

Square and Rectangular Plates:

Square 4 holes — 12×12 mm
Square 4 holes — 14×14 mm
Square 4 holes — 16×16 mm
Rectangular — 10×16 mm
Double square — 10.6×20.6 mm

Matrix Plates:

8 holes — 12×28 mm
8 holes — 14×34 mm

Y-Plates and Gap Plates:

Y-plate 5 holes — 20 mm
Gap — 25 mm
Gap — 35 mm
Gap — 45 mm

Burr Hole Plates:

For skull vault — 8 mm
For skull vault — 15 mm
For skull vault — 24 mm
6 holes — 12 mm
6 holes — 15 mm
6 holes — 17 mm
6 holes — 24 mm
With cutout 5 holes — 12 mm
With cutout 5 holes — 15 mm
With cutout 5 holes — 17 mm
With cutout 5 holes — 24 mm

Occipital Plates:

25.1×42.2 mm

3D Mesh Plates:

0.41t, 50×50 mm
0.4t, 100×100 mm
0.4t, 100×150 mm
0.4t, 150×150 mm
0.6t, 50×50 mm
0.6t, 100×100 mm
0.6t, 100×150 mm
0.6t, 150×150 mm

Screws:

Self-tapping 1.5×3 mm — up to 50 pcs
Self-tapping 1.5×4 mm — up to 50 pcs
Self-tapping 1.5×5 mm — up to 50 pcs
Self-tapping 1.5×6 mm — up to 50 pcs
Emergency 1.8×4 mm — up to 50 pcs
Emergency 1.8×6 mm — up to 50 pcs

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, Implantable Plates with Screws for Cranioplasty, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.

Back