BougieCap Application Cap

BougieCap Application Cap

The following variants of the BougieCap application cap are available:

1. Application cap with an outer diameter of 7.1 mm
   For endoscopes with a distal part diameter of 5.5 - 6 mm.
   • Application cap with an outer diameter of 7.1 mm
   • Instructions for use
2. Application cap with an outer diameter of 8.1 mm
   For endoscopes with a distal part diameter of 5.5 - 6 mm.
   • Application cap with an outer diameter of 8.1 mm
   • Instructions for use
3. Application cap with an outer diameter of 10.1 mm
   For endoscopes with a distal part diameter of 5.5 - 6 mm.
   • Application cap with an outer diameter of 10.1 mm
   • Instructions for use
4. Application cap with an outer diameter of 12 mm
   For endoscopes with a distal part diameter of 9.8 - 10.3 mm.
   • Application cap with an outer diameter of 12 mm
   • Instructions for use
5. Application cap with an outer diameter of 14 mm
   For endoscopes with a distal part diameter of 9.8 - 10.3 mm.
   • Application cap with an outer diameter of 14 mm
   • Instructions for use
6. Application cap with an outer diameter of 16 mm
   For endoscopes with a distal part diameter of 9.8 - 10.3 mm.
   • Application cap with an outer diameter of 16 mm
   • Instructions for use

If your organization wants to sell medical equipment, medical products or medical consumables in Russia, for example, BougieCap Application Cap, then our information portal MEDCOMMERCE can help you with this. To do this, simply fill out the feedback form by clicking on the link FEEDBACK FORM.

The products posted on our website are approved for use in Russia by the state regulator Roszdravnadzor (Federal Service for Surveillance in Healthcare). The information is for informational purposes only.